Ohio Game Fishing banner

1 - 3 of 3 Posts

·
JOE
Joined
·
213 Posts
Discussion Starter #1
I have a evanrude motor sometimes it want start with the key but it will start from the silanoid. then it will start with the key for a while but you naver know win it not going with the key. any one have a ideal what might be the problem any help will be appreciated
 

·
ORIGINAL TEAM OGF
Joined
·
5,506 Posts
Sure sounds like a bad ignition switch to me,espescially if it cranks everytime you jump the solenoid.
There are a set of contacts in the switch that energize the solenoid when you turn the key.
Go to about any Marine store or possibly Napa and they can fix you up.
 

·
Registered
Joined
·
406 Posts
un hook the batt then take the switch out of the dash look at the backof the switch it should tell ya what wire goes where u can jump it there just like at the silanoid if it does the same it needs a new switch napa would be your best bet probably
 
1 - 3 of 3 Posts
Top