close

Privacy guaranteed - Your email is not shared with anyone.

DO-IT Molds - pics attached

Discussion in 'OGF Marketplace' started by pymybob, May 1, 2005.

  1. pymybob

    pymybob

    0   0   0

    I have 5 DO-IT molds for sale. Here is the pic:
    [​IMG]
    They are:
    Model: PO-7-A - Pinch On Sinker
    Model: RM-1618 - Removable Splitshot - 1/16 & 1/8 ounce - size 7 & 4 SOLD
    Model: CR-4-AB - Crescent Sinker - 1, 1 1/2, 2 & 3 ounce
    Model: BL-8-AB - Bell Sinker - 1/8, 3/8, 5/8, 1 1/2 ounce
    Model: EG-9-M2 - Medium Egg Sinkers SOLD

    I also have three other molds that are not DO-IT molds. Here is the pic:
    [​IMG]

    They all were manufactured by C. Palmer Mnfg. out of West Newton, PA
    Model 2505 - Roundhead jigs - 1/16, 1/8, 1/4 ounce
    Model 201 - Flat Sinkers - 1/4, 1/2, 3/4, 1 ounce
    Model 151 - Egg Sinkers - various sizes
    2 Ladels TAKEN

    I'm asking $10 each for the DO-IT molds and $15 each for the C. Palmer molds. Ladels are FREE for whomever wants them.

    $60 OBO takes everything!
    Will deliver (within reason) or buyer pays for shipping.
     
    Last edited by a moderator: Apr 30, 2015
  2. Ðe§perado™

    Ðe§perado™ Catfisherman/Bowfisherman

    0   0   0

    There are a few I would like to buy and get the ladels too. I'll pm you.
     

  3. pymybob

    pymybob

    0   0   0

    Desperado,

    The molds & ladels you want, I marked as sold below. I'll get back with you on them this week. Still have several molds available if anyone's interested...
     
  4. crankus_maximus

    crankus_maximus Crankus Baitus Maximus

    0   0   0

    If the roundhead mold can accept larger hooks, AKA 1/0 to 3 or 4/0....I will take it. Let me know pymybob!
     
  5. pymybob

    pymybob

    0   0   0

    I have two guys ahead of you Crank. If they both fall through, I'll get back with you on that mold. Thanks!
     
  6. crankus_maximus

    crankus_maximus Crankus Baitus Maximus

    0   0   0

    Sorry, didn't see any messages here. MY bad,
     
  7. cool where do u get the matal to melt in tto the molds
     
  8. crankus_maximus

    crankus_maximus Crankus Baitus Maximus

    0   0   0

    Easy, go to any place that sells and installs tires and ask for old wheel weights. They will gladly give you all you want. Throw them in an old heavy-duty pot on a burner outside and melt it all. Use a spoon (bent to look like a back-ho) to skim off any impurities that will rise to the top. I then pour these into manageable ingot sizes for later using in my pour-pot. The pouring pot melts lead in a hopper and has a level that when pulled will dispense melted lead into these molds. Pretty darn cool.
     
  9. tatter0035

    tatter0035

    0   0   0

    4
    0
    301
    Hi do you have any DO-IT molds left for SALE, if so i'll PAY $10.00 + actual freight cost

    Shipping cost by USPS Priority Mail

    1- mold $3.85
    2 or more molds $7.70 USPS Priority Flate Rate
     
Loading...
Similar Threads Forum Date
DO-IT MOLDS OGF Marketplace Feb 29, 2016
WTB 2 used Do-It molds OGF Marketplace Jan 6, 2016
FS: Do-It Jig Molds OGF Marketplace Aug 30, 2015
Moding some Do-It molds Tackle Making Jul 6, 2014
FS: Do-It Jig Molds - Tip Up Jighead w/Screwlock & Swing Football Molds OGF Marketplace Mar 9, 2014