Privacy guaranteed - Your email is not shared with anyone.

Boat Help!!!

Discussion in 'Southeast Ohio Fishing Reports' started by saugeyeslayer1, Feb 27, 2005.

  1. Need help with getting my boat back on the water i got the boat for free cause it needs some work. W :confused:Wondering how to fix the holes in the floor of the boat I think that it needs to have the rivets replaced and there is a crack along where the bottom and the side wall meet any advice would be helpfull THANKS saugeyeslayer1
    P.S. This is an aluminum boat thanks
  2. Fish4Fun

    Fish4Fun Relaxing.

    find a friend who knows how to weld aluminum
    tighten up the rivets by penging them with a hamer and a block supporting the other side and then jb weld them.
    just some ideas.

    maybe you can post a pic on the crack to give us a better idea if its big you will need someone to weld it

  3. If you live close to a semi trailer shop or truck stop they might be able to help you. They will have the rivets and welder to fix your boat. This I learned the hard way on a rock in lake Erie.