Ohio Game Fishing banner

1 - 9 of 9 Posts

·
Registered
Joined
·
2,797 Posts
Discussion Starter · #1 ·
Up 4Sale I have a 14ft. fiberglass tri-hull made by Appleby. Boat is a 73 model, solid with no leaks. Custom built casting platform and rear deck (bass boat style) with swivel "butt seat" on deck and a full swivel chair @ the stern. Marine carpet throughout, 10 gallon homemade livewell with access from deck - the aerator broke on this last spring and needs replaced.

1994 Tilt Trailer with rollers, good tires, solid jack, 1 7/8 inch receiver. Pulls well at any speed & can be towed with any tow vehicle (including 4 cyl). Can be launched nearly anywhere - no boat ramp required.

1992 Force 9.9 short shaft, 2 cylinder, manual tilt with locking bar, 3 blade prop, 6 gallon gas tank with quick connects. This motor has very low hours and runs strong. ALWAYS stored indoors.

OLD Motorguide bow mount foot-controlled trolling motor with unknown thrust (28-32 lbs), 3 speed and still mechanically working

Humminbird LCR 3D Sonar unit with 15 ft. cable and high speed transducer.

New registration through March 2010!
Anchor, bow light, 2 "clamp on" style rod holders, Oar, lifevest, mounted fire extinguisher.

Boat is stable - can stand and walk on casting deck. Storage under casting deck. Draft is less than 1 foot of water. Boat also has an AM/FM CD player with 6X8 speaker mounted and wired - this was working last spring (low volume), but I am not considering it in the price as I would assume you would want to replace.

Clear OH title.

This boat was used on Alum Creek, Hoover, CC, CJ Brown, Cowan, Acton Lake & a private gravel pit.

Please note:

This boat needs cleaned up as it has been sitting (tarped and covered) since last fall.
"butt" seat has a tear in it (I put electrical tape over it).
1 broken roller on trailer (side is broken off, still works)
hull has scrapes in the paint (no damage to boat, surface scatches from loading/unloading)
Surface rust on fenders and hitch
casting platform has started to shift towards stern (about 1 inch) and needs attention.

Overall this is a great little fishing machine and I caught a ton of fish in this little boat. It is great for 2 people, but really no more. The boat needs some TLC as it was only in the water a few times last season and put away in October. Only reason I am selling is because I also have a large boat and I just don't have the time to justify 2 boats anymore (wife is riding my case about it taking up space too:D ).

I am located in Springfield, OH.

Pictures to follow - $1300
 

·
Registered
Joined
·
2,797 Posts
Discussion Starter · #4 ·
bump

FYI - the carpet is not stained, but that is water in the pics - it was pouring rain when I took the pics.
 

·
Registered
Joined
·
2,797 Posts
Discussion Starter · #6 ·
I have had a handful of pm's regarding the motor - at this point I would like to keep the motor with the boat. I have kept track of who contacted me regarding the motor and in what order; if I decide to split it I will try to make a deal in that order.

Thanks to all those that have been interested.
 

·
Registered
Joined
·
2,797 Posts
Discussion Starter · #8 ·
The potential buyer had some financial problems - boat is back on the market.

Reduced to $1100; please pm me if you are interested.
 

·
Clearfork Muskie Addict
Joined
·
420 Posts
if you have anyone that still wants the motor i may be up for the boat only. Let me know if you are interested and a price for just the boat. Thanks
 
1 - 9 of 9 Posts
Top