Ohio Game Fishing banner

Clear coating spoons and harness blades

2K views 6 replies 5 participants last post by  Still Hookinn 
#1 ·
hey guys I painted up a bunch of Michigan stingers that lost there paint and while I was at it I did a bunch of custom harness blades what should I use for a clear coat automotive clear coat or thinned out epoxy I'm worried as not to add to much weight as it may affect the action any suggestions would be greatly appreciated
 
#5 ·
Clear powder coat? I paint blades and have been using automotive clear coat from spray cans with unsatisfactory results. Is this powder coat something I could use on top of Createx?
Thanks
I buy from here,i find the cheapest on sale,and I get 2 lb clear,i can mix my color.
get 4 basic colors and you can mix anythink,they have the liquid to mix with powder and brush that on.i never use that.i use only powder and mix that with clear to make candy effect.on jigs and blades and spoons.

http://www.powderbuythepound.com/powder-coating-powders/
 
#4 ·
I use it on top of createx. I've used a harbor freight powder coat gun and a heat gun and a Abrasive airbrush , both work, but I prefer the abrasive airbrush then you can control the thickness better . Just be sure to prime blades with high heat white primer or your colors will fade after you cure them .
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top